User's Manual

Hotwire

6210-A2, 6211-A2, and 6381-A2

Quick Installation Instructions

Document Number 6210-A2-GZ11-00

April 2004

Installation

To install your modem:

➊ Connect the LINE port of the modem to your DSL line

using the supplied phone cord.

➋ Connect the TELEPHONE port of the modem to your

telephone using the cord that came with your telephone.

➌ Connect either:

• The LAN port of the modem to a 10/100BaseT

Ethernet network interface card on your PC, or to a

hub or switch on your network. An Ethernet cable is

supplied with your modem.

– or –

• The USB port of the modem to a free USB port on

your PC.

➍ Connect the POWER receptacle to the power supply

and plug the power supply into a wall outlet.

If you connected the USB port of the modem to your PC, the

Found New Hardware Wizard appears on your computer

screen. Insert the supplied CD in your CD drive and install

the USB drivers on it as directed by the Wizard.

See the user’s guide on the CD for important safety

instructions and more information.

04-17510

LINE LAN POWERPHONE USB

DEFAULT

RESET

PAGE 1
Hotwire® 6210-A2, 6211-A2, and 6381-A2 Quick Installation Instructions Document Number 6210-A2-GZ11-00 April 2004 Installation To install your modem: ➊ Connect the LINE port of the modem to your DSL line RESET using the supplied phone cord. ➋ Connect the TELEPHONE port of the modem to your telephone using the cord that came with your telephone. ➌ Connect either: • The LAN port of the modem to a 10/100BaseT Ethernet network interface card on your PC, or to a hub or switch on your network.
PAGE 2
Software and Firmware License Agreement ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.