user manual

Initial Startup and Configuration
3-7
8700-A2-GB20-00
April 2000
Restoring Access to the User Interface
Improper configuration of the unit could render the user interface inaccessible. If
this occurs, access can be restored using the management card of the DSLAM.
" Procedure
To reset the DSL Card using the management card of the DSLAM:
1. Select Configuration →DSL Cards →Reset Slot.
2. Enter DSLnn, where nn is the slot number for the DSL card you wish to reset.
3. Enter Reset.
4. Enter Y if you want to clear NVRAM also, otherwise enter N.
5. Enter Y at the prompt to confirm.
NOTE:
When you enter Y, all data connectivity is interrupted.
Resetting the Device
If the user interface is functional, and you would like to reset the card without
removing the card from the DSLAM, follow this procedure.
" Procedure
To reset the card using the Control branch:
1. From the Main Menu, select Control →Reset Device.
2. The message Are you sure? appears.
3. Enter Yes.