User's Manual

4
Installing the Hotwire ADSL/R Bridge/Router
Place the router on a flat surface with clearance for the rear connectors.
Procedure
1. UNPLUG TELEPHONE. If a telephone is connected at
the RJ11 wall jack where the router will be installed,
unplug the telephone cable from the wall jack.
2. RECONNECT TELEPHONE.
(Optional. Go to Step 3 if you are not
connecting a telephone to the router.)
Plug the existing telephone cable that was
unplugged in Step 1 into the jack labeled
PHONE. The router has a built-in filter, so
no filter is required on this phone.
3. CONNECT DSL LINE. Use the supplied
RJ11 telephone cable for the ADSL/R line
connection. Insert one end of the cable into
the jack labeled LINE. Insert the other end
of the cable into the RJ11 wall jack.
RJ11
Wall Jack
P
H
O
N
E
L
IN
E
ETHERNET
POW
ER
PHONE
RJ11
Wall
Jack
PHONE LINE
RJ11
6-pin
Interface
Cable
LINE
02-17358