Pergola 11x16 Manual and Assembly

Canopy Rod(18)
x14
Canopy Rod(19)
x7
Canopy(17)
x1
Canopy Cover(20)
x2
Metal Cover
Connector(14)
x4
screw(25)
x30
screw(24)
x14
Insert canopy rods (19) into canopy rods (18,18) as shown and fasten with screws (25).
Create 7 sets.
Spread out the canopy(17) on an even flat surface.
Insert one canopy rod(18,19,18) in to the first“sleeve”
in the canopy until it shows in the center opening.
19 18
25
6.A
STEP 6
Installing the Canopy
Components
6.B
19 18
18
18,19,18
17
15 of 20