Pergola 11x16 Manual and Assembly

6.C
With the help of two people, pass the canopy rod (18,19,18)
through the first canopy loop(26A) in beam with track (6A,7A) as
shown.
Continue sliding the rod through the canopy sleeve until
it emerges at the other end.
Fasten the canopy rod (18,19,18) at each end to canopy loops (26)
in beams
with track (6,7) using screws (24). Repeat steps 6C/6D
with all seven canopy rods (18,19,18).Use the attached handles to
open and close the canopy.The magnets (16) you installed in step 2
will hold the unfolded canopy in place at each end.
6.D
6,7
26
24
17
17
18,19,18
6A/7A
26A
17
18,19,18
16 of 20
6A,7A
17
18,19
26A