Pergola 11x16 Manual and Assembly

1.B
9
1/1A
8
9
1/1A
9
8
1/1A
23
23
8
9
1/1A
1
1
1A
1A
7 of 20
x 2
x 2
Slide support frames(9) over lower end of corner profiles(1/1A).
Align pre-drilled screw holes in corner profiles(1/1A) with screw
holes in support plate(8).
Attach support plates(8) to corner profiles(1/1A) as shown,
using two screws(23) for each plate.
Leave support frames(10) about 10” over lower end of corner profiles(1/1A) until step 4
(Securing the pergola to the ground)