Owner’s Manual For ProStyle Warmer Warmer Model Numbers: Prostyle with Pump 2018 (120v) 2218 (230v) www.ManufacturedFun.com Paragon International, Inc. • 731 W. 18th Street P.O. Box 560 • Nevada, IA 50201 USA Phone (515) 382-8000 • Toll-free (800) 433-0333 • Fax (515) 382-8001 • Email: info@manufacturedfun.
Safety Precautions Paragon values your continued safety above all else. Please follow these guidelines when using your equipment to prevent injury and maximize product performance: No direct contact to equipment by the general public should be allowed when used in food service locations. Only trained personnel should operate this equipment. Carefully read any and all instructions before beginning operation of the equipment. Always wear safety glasses when servicing equipment.
Electrical Requirements This product requires a properly-grounded 120 volt supply with a 15 amp circuit. The Paragon Warmers have a current draw of 1.67 amps or 200 watts. (Export voltage is 230VAC) We recommend your Paragon Warmer be plugged directly into a dedicated outlet. Extension cords may create a safety hazard and reduce its performance. Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong adapter.
Introduction Our goal is to provide you with the best solutions to attract customers, expand your business, and improve your profits. That’s why this product has been specially-crafted to meet precise specifications for performance, efficiency, and output. Your Paragon Warmer Features: • Stainless steel construction has a 200 watt heating element to keep all of the product warm and fresh for hours. • Easy to clean surfaces - just wipe with a damp cloth. • Adjustable thermostat, and 6’ power cord.
Paragon is proud to be your partner for Manufactured Fun! Operating Instructions 1. Always clean unit thoroughly before each use. 2. Fill water vessel with 2 cups of water. 3. Install spacer and product container into water vessel. 4. Plug cord in, turn on warmer and adjust thermostat. This will turn on the heating element in the base of the unit and will keep your product warm and fresh. 5. Keep the power switch in the off position when the warmer is empty or not being used.
Power Cord 512091 Thermostat 597130 Heating Element 597100 Bain Marie Pot 597110 Feet with Rivets 540322 Warming Pot 597209 Switch 11109 label Set 597201 Top Cover 597002 Lid 597214 Knob 519092 Pump 597120 p.
