User Manual

Thank you for
your purchase and enjoy!
p. 5
Warmer Care
Always clean unit thoroughly before each use.
Fill water vessel with 2 cups of water.
Install spacer and product container into water vessel.
Plug cord in, turn on warmer and adjust thermostat. This will
turn on the heating element in the base of the unit and will
keep your product warm and fresh.
Keep the power switch in the off position when the warmer
is empty or not being used.
It is recommended that the warmer be cleaned out daily using
suitable cleaners that may be used on food service equipment.
• Always make sure the machine is off and unplugged before
cleaning.
NEVER use water on the electrical components in the base.
WARNING: Always turn the POWER switch to OFF when the
machine is not in use.
OPerating instructiOns
1.
2.
3.
4.
5.
Paragon is proud to be your
partner for Manufactured
Fun!