Full Product Manual

Extra Thick 11 Gauge
Solid Steel Construction
Easy to Program & Operate
Resists Hand & Mechanical
Tool Attacks
Opens by Key or Electronic
Lock
Inside Tamper-Proof Hinges
Powder-Coated Interior & Exterior
Code can be changed infinitely
Pre-Drilled Holes for Anchoring to Wall
Anchor Bolts Included
Quarter Master 7775 Electronic/Digital
Home Office Security Safe
Copyright 2010 DTX International
15
SPECIFICATIONS
Model
Material
Bolt
Dimensions
Steel
Quarter Master
7775
19.5”H x 14”W x 13.7”D
HOW TO USE YOUR QUARTER MASTER 7775
Before using your safe:
1. First, remove the center cover of the key plate on the keypad and open the
door with the key provided (Figure A).
IMPORTANT: Please do not store the door keys in your safe!
2. Next, remove the battery cover plate located on the inside of the door and
install the 4 AA 1.5V batteries provided (Figure B). Replace the battery
cover.
To setup or change a passcode:
1. With door open, locate the red button on the back of door near the hinge
(Figure C). Press the red button, listen for a beep and then enter your
new user passcode. New user passcodes may be 3 to 6 digits long.
2. Immediately after entering your new code, press the “A” or “B” button on
the keypad. Your new user code is now stored.
Note: This safe stores up to 2 passcodes
simultaneously; a user and manager code.
Entering a third code will erase the first
passcode entered.
Your safe comes with a set of keys.
Please do not store keys in safe! Keep
secure in a safe place.
7775 Keypad
Figure A
Figure B
Figure C