Full Product Manual

SureDrop 7925 Digital Keypad Deluxe
Depository Safe & SureDrop 7900 Digital
Keypad Double Depository Safe
Copyright 2010 DTX International
25
SPECIFICATIONS
HOW TO USE YOUR SUREDROP 7900, 7925
Model
Material
Bolt
Dimensions
Steel
SureDrop 7900
Double Deposit
with top drop
30.5”H x 14.5”W x 14”D
Steel
Deposit
17.7”H x 13.7”W x 12”D
Extra Thick 11 Gauge
Solid Steel Construction
Easy to Program & Operate
Resists Hand & Mechanical
Tool Attacks
Opens by Key or Electronic
Lock
Inside Tamper-Proof Hinges
Powder-Coated Interior & Exterior
Code can be changed infinitely
Pre-Drilled Holes for Anchoring to Wall
Front loading, fitted with a Sawtooth edge
tilting baffle plate to prevent "fishing out"
Note: 7900 is a Double Drop or two
separate safes in one!
SureDrop 7925
Before using your safe:
1. First, remove the battery cover plate on the keypad and open
the door with the key provided (Figure A). Keep the door
open. IMPORTANT: Please do not store the door keys in
your safe!
2. Next, install the 4 AA 1.5V batteries provided (Figure B).
Replace the battery cover.
To setup or change a user passcode:
1. With door open, locate the red button on the back of door near the hinge
(Figure C). Press the red button, and the screen will display “-----”.
Immediately press the Start button on the keypad and enter your new user passcode. New user
passcodes should be 6 digits long. Note: This safe stores up to 2 passcodes simultaneously; a user
code and a manager code.
2. Immediately after entering your new code, the screen should display “IN”. Your new user code is now
stored. Entering a third code will erase the first passcode entered. If the screen does not display “IN”
after entering a passcode, repeat steps 1-2 above making sure to press the Start button quickly after
pressing the red button. Your safe comes with a set of keys. Please do not store keys in safe!
Keep secure in a safe place.
Figure A
Figure B
Figure D
Figure C