11 Personal

Result

After the operation is completed you receive a fully functional partition formatted to the specified file system.

Deleting Partitions

Dialog Startup

In order to start the operation you should take the following steps:

1. Select a partition on the Disk Map;

2. Select in the Main Menu: Partition > Delete Partition.

There are other ways to start up this function, please consult the Interface Overview

chapter to know more on the subject.

Dialog Setup

Initially the program suggests you just to remove references to the selected partition from the Partition Table.

 Enter the volume label to confirm deleting. To confirm deletion of the selected partition, enter its Volume

Label. The current volume label is displayed above.

 Do not ask volume label next time. Mark the option to inhibit confirmation next time you start the dialog.

To additionally destroy the on-partition data, click the More options button at the foot of the dialog page, so you will be

able to define:

 Select the byte mask…. The HEX value spinner control enables to set a two-figure hexadecimal character value

("00" by default). The available range is from "00" to "FF". It is synchronized with the ASCII value.