11 Personal

Result

After the operation is completed the required data will be placed into the specified destination.

Available operation scenarios:



Copying of data from the corrupted system disk to another hard disk



Burning of data from the corrupted system disk to CD/DVD

Mount Partition

The program enables to assign or remove drive letters of existing formatted partitions.

Assign Drive Letter

In order to mount a partition you should take the following steps:

1. Select a partition on the Disk Map.

2. Select in the Main Menu: Partition > Assign Drive Letter…

There are other ways to start up this function, please consult the Interface Overview

chapter to know more on the subject.

3. Specify a drive letter for the selected partition. Initially the program suggests some consistent value for this

parameter. So you may just press the Yes button to confirm the operation.

However you can manually define the required letter by selecting it from the pull-down list of available drive

letters.

4. The operation will be performed immediately after confirmation.

Remove Drive Letter

In order to un-mount a partition you should take the following steps:

1. Select a partition on the Disk Map.

2. Select in the Main Menu: Partition > Remove Drive Letter.