11 Professional

 Outgoing mail server (SMTP). To send messages by using the built-in mail client, it is necessary to have access to

a computer running an SMTP (Simple Mail Transfer Protocol) server. All outgoing messages are first sent to the

SMTP server, which in its turn delivers them to the required recipients. The address may be represented as a

traditional Internet host name (e.g.: mail.com) or as an IP numeric address (e.g. xxx.xxx.xxx.xx).

 User e-mail address. Specify an e-mail address that has been assigned by the Internet Service Provider or

organization's e-mail administrator.

 My outgoing server requires authentication. Activate the option to allow the program to make authentication

on the server before sending messages.

- User name. Enter the name that will be used to log in to the e-mail account.

- Password. Enter the password that will be used to access the mail server.

When you’re ready with the settings, click on the Send test e-mail button to check if everything is OK.

 Send e-mail notification on apply. Specify an e-mail to send notifications on the carried out operations.

- Send mail in HTML format. Activate the option to create messages in the HTML format instead of plain text.

- Send complete report after applying operations. Activate the option to create an in-depth report on the

carried out operations and send it after performing the last operation.

- Send graphical view of the disk sub-system before and after apply. Activate the option to allow the program

to attach two pictures of the disk layout made before and after the operation is completed.

By clicking the link at the bottom of the window you can jump to the Operation

Dependency Options.

Operation Dependency Options

This section contains a set of options that will be taken into account when the Send e-mail notification on apply function

is enabled. By marking/unmarking a checkbox opposite the required operation you can choose whether to receive an e-

mail notification on its completion or not.