11 Professional

When you select a small-sized bar (i.e. corresponding to a logical disk) the Explorer Bar will display information on it as

well. The page title will contain a drive letter, which is assigned to the disk. The disk layout graph will be colored in

accordance with the volume ratio of the used space to the free space (the light colored sector). The table on the right

will contain the following information:

 Volume label (if available),

 Type of the logical disk,

 File system (represented by the color of the graph and the selected bar),

 Total size, used space and free space (in GB or MB).

Below there is a list of wizards, which may be called for this disk. All default values of parameters will correspond to the

disk settings.

Partition Management

In this chapter you will find all the information necessary to carry out partitioning operations supported by the program.

Basic Partitioning Operations

Here you can learn how to accomplish basic partitioning operations (create, format, delete).

Creating Partitions

The program provides the ability to create a new partition within a block of un-partitioned space.

Restrictions

1. Do not use the Create Partition function in order to undelete the last deleted partition.

2. The program allows creating new partitions only within blocks of un-partitioned space. It cannot convert a free

space on an existing partition to a new partition.

3. The program cannot create new partitions on Dynamic Disks.

Dialog Startup

1. Select a block of free space on the Disk Map;