11 Professional

 The amount of sectors per boot. This parameter is available exclusively for FAT16 and FAT32 file systems. Set

the number of sectors to be reserved for the boot area on the partition with this spinner control.

 The amount of root entries. This parameter is available exclusively for FAT16 file system. Set the maximum

amount of files/directories to be placed in the Root Directory on the FAT16 partition.

 The amount of sectors per cluster. Define the Cluster Size for the formatted partition with this spinner control.



Number of available options depends on the selected file system type.

Result

After the operation is completed you receive a fully functional partition formatted to the specified file system.

Deleting Partitions

Dialog Startup

In order to start the operation you should take the following steps:

1. Select a partition on the Disk Map;

2. Select in the Main Menu: Partition > Delete Partition.

There are other ways to start up this function, please consult the Interface Overview

chapter to know more on the subject.

Dialog Setup

Initially the program suggests you just to remove references to the selected partition from the Partition Table.

 Enter the volume label to confirm deleting. To confirm deletion of the selected partition, enter its Volume

Label. The current volume label is displayed above.

 Do not ask volume label next time. Mark the option to inhibit confirmation next time you start the dialog.

To additionally destroy the on-partition data, click the More options button at the foot of the dialog page, so you will be

able to define: