11 Professional

 Select the byte mask…. The HEX value spinner control enables to set a two-figure hexadecimal character value

("00" by default). The available range is from "00" to "FF". It is synchronized with the ASCII value.

 Specify the number of wiping passes. You can choose a number of passes for the wiping pattern.

 Verify wipe results. You can also choose whether to carry out residual data verification or not specifying the

percentage of sectors to check.

Result

By default, the operation takes only a fraction of a second. However, the program waits until Windows completes the

modification of the disk layout.

Hard Disk Management

In this chapter you will find all the information necessary to carry hard disk operations supported by the program.

Updating MBR

The program enables to overwrite the current bootable code in the MBR (Master Boot Record) by the standard

bootstrap code. This can help to repair a corrupted bootable code of a hard disk resulted from a boot virus attack or a

malfunction of boot management software.

In order to update MBR of a hard disk you should take the following steps:

1. Select a hard disk on the Disk Map.

2. Select in the Main Menu: Hard Disk > Update MBR.

There are other ways to start up this function, please consult the Interface Overview

chapter to know more on the subject.

3. The operation will be performed immediately after confirmation.