11 Professional

 Click the standard browse button [...] to browse for the required network share or manually enter a path to

it;

 Define a letter from the pull-down list of available drive letters;

 Click the Connect as user button at the foot of the dialog page to specify a user name and password to

access the selected network share if necessary.

By clicking Disconnect Drive… you can delete an existing network share if necessary.

5. Click the Network identification tab to change a network name of your computer (generated automatically) and

a workgroup name.

6. By default, the wizard saves all network settings in the netconf.ini file located on the WinPE RAM drive, thus it

will only be available until you restart the computer. However, you can just once configure your network device

and then save this file to some other destination, for instance a local drive, and this way avoid constant re-

configuration, just by providing a path to it. So Click Save to file to save the netconfig.ini file to the required

destination.

Network troubleshooter

Network Configurator includes a traceroute/ping utility that enables to get detailed information on particular routes and

measure transit delays of packets across an Internet Protocol (IP) network. So with its help you can easily track down

problematic nodes.

1. If you need to ping some network host, please select Ping, then type in the required IP address or its name. Click

Start when ready.