10 Personal

Table Of Contents

The Partition Label is a small textual field (up to 11 characters) that is located in the partition's boot sector. It is

detectable by any partitioning tool and is used for notification purposes only.

In order to change a partition label you should take the following steps:

1. Select a partition on the Disk Map.

2. Call the Change Volume Label dialog to set up the operation. There are several ways to do it:

 Select in the Main Menu: Partition > Modify > Change Volume Label.

 On the Explorer Bar: click on the current volume label.

 Call the popup menu for the selected partition (right click of the mouse button) on the Disk Map,

then select the menu item: Change Volume Label.

3. Enter a label for the selected partition.

4. The operation will be performed immediately after confirmation.

HARD DISK MANAGEMENT

In this chapter you will find all the information necessary to carry hard disk operations supported by the

program (Update MBR, Convert to Basic, Change Primary Slot).

UPDATING MBR

The program enables to overwrite the current bootable code in the MBR (Master Boot Record) by the standard

bootstrap code. This can help to repair a corrupted bootable code of a hard disk resulted from a boot virus

attack or a malfunction of boot management software.

In order to update MBR of a hard disk you should take the following steps:

1. Select a hard disk on the Disk Map.

2. Call the Update MBR dialog to set up the operation. There are several ways to do it:

 Select in the Main Menu: Hard Disk > Update MBR.

 Call the popup menu for the selected hard disk (right click of the mouse button) on the Disk Map,

then select the menu item: Update MBR.