User manual

E-Mail Options

This section contains a set of options that will be taken into account during the Send log files and Send e-mail

notification operations:

• Outgoing mail server (SMTP). To send messages by using the built-in mail client, it is necessary to have access to

a computer running an SMTP (Simple Mail Transfer Protocol) server. All outgoing messages are first sent to the

SMTP server, which in its turn delivers them to the required recipients. The address may be represented as a

traditional Internet host name (e.g.: mail.com) or as an IP numeric address (e.g. xxx.xxx.xxx.xx).

• User e-mail address. Specify an e-mail address that has been assigned by the Internet Service Provider or

organization's e-mail administrator.

• My outgoing server requires authentication. Activate the option to allow the program to make authentication

on the server before sending messages.

- User name. Enter the name that will be used to log in to the e-mail account.

- Password. Enter the password that will be used to access the mail server.

• Send e-mail notification on apply. Specify an e-mail to send notifications on the carried out operations.

- Send mail in HTML format. Activate the option to create messages in the HTML format instead of plain text.

- Send complete report after applying operations. Activate the option to create an in-depth report on the

carried out operations and send it after performing the last operation.