User manual

169

8. Click the Finish button to close Boot Corrector.

9. Reboot the computer.

Fixing Windows startup ability

Let’s assume that due to an unknown reason your Windows fails to complete the startup procedure. At first everything

seems quite OK, you can see the standard startup messages on the screen, but at some moment it hangs up.

To fix your Windows startup ability, please do the following:

1. Start up the computer from our Linux/DOS recovery media.

Recovery Media Builder can help you prepare the Linux/DOS or WinPE recovery

environment either on a CD/DVD disc or a thumb drive.

To automatically boot from the recovery media please make sure the on-board BIOS is set

up to boot from CD/USB first.

2. In the boot menu select Normal Mode to use the Linux recovery environment (more preferable) or Safe Mode

to use the PTS DOS recovery environment (in case you’ve got problems with Linux). Moreover you’ve got the

option to boot into the Low-Graphics Safe Mode (PTS DOS safe mode) to cope with a serious hardware

incompatibility. In this case, only the minimal set of drivers will be included, like hard disk, monitor, and

keyboard drivers. This mode has simple graphics and a simple menu.