User manual

234

10. When copying is completed, shut down the computer.

11. Disconnect (physically) the source hard disk.

12. Boot the computer from the destination hard disk.

To make a Win2K+ operating system bootable on different hardware, please additionally

complete the P2P Adjust OS Wizard.

Making system bootable on different hardware (P2P Adjust OS)

Let’s assume you had to migrate to a new hardware platform. You just connected your system hard disk to the brand

new PC and tried to start up the operating system - you do know for sure now that this operation had been doomed to

failure from the very beginning. With our program you can easily tackle this naughty problem.

But before you start, please make sure the following conditions are met:

• You’ve got drivers for the new hardware ready to use, not zipped or in .exe files.

• Your OS is unrolled on the new computer, not in a backup image.

To recover bootability after migrating your physical system to different hardware, please do the following:

1. Start up the computer from our WinPE media.

2. Once it has been loaded, read the agreement and then mark the appropriate checkbox to accept.

If you do not agree with any conditions stated there, you won’t be able to use the program.

3. Once you accept the agreement, you will see the Universal Application Launcher. Launch P2P Adjust OS Wizard.



Our WinPE 2.1 based environment offers excellent hardware support. However in case it

doesn’t have a driver for your disk controller, your hard disks will be unavailable. Please

consult the

Adding specific drivers scenario to know how to tackle this issue.

4. On the Wizard's Welcome page, click the Next button.