User manual

Configuring network

If your local network has a DHCP server, a network connection will be automatically configured once our WinPE

recovery environment has been started up. Otherwise you will need to do it manually with a handy dialog by providing

an IP address, a network mask, default gateway, etc. Besides with its help you can easily map network shares.

To manually set up a network connection and map a network share, please do the following:

1. Once you accept the agreement, you will see the Universal Application Launcher. Click Configure Network.

2. In the opened dialog provide an IP address, a network mask, default gateway, etc. for your network device.

3. Click the Network drivers tab to map a network share.

4. Click Map Network Drive and provide all the necessary information to map a network share in the opened

dialog:

• Click the standard browse button [...] to browse for the required network share or manually enter a path to

it;

• Define a letter from the pull-down list of available drive letters;

• Click the Connect as user button at the foot of the dialog page to specify a user name and password to

access the selected network share if necessary.