User manual

241

By clicking Disconnect Drive… you can delete an existing network share if necessary.

5. Click the Network identification tab to change a network name of your computer (generated automatically) and

a workgroup name.

6. By default, the wizard saves all network settings in the netconf.ini file located on the WinPE RAM drive, thus it

will only be available until you restart the computer. However, you can just once configure your network device

and then save this file to some other destination, for instance a local drive, and this way avoid constant re-

configuration, just by providing a path to it. So Click Save to file to save the netconfig.ini file to the required

destination.

Saving log files

The program enables to simplify the procedure of sending support requests to the Paragon Support Team. In case of

having difficulties with handling the program, you, with the help of this very function, can address the company support

engineers and provide them with all the information they need such as the disk layout, performed operations, etc. in

order to tackle the encountered problem. Information of that kind is stored in log files.

To prepare a log files package, please do the following:

1. Once you accept the agreement, you will see the Universal Application Launcher. Click Log Saver.

2. In the opened dialog browse for the required location of the log files package or manually provide a full path to

it. Click Collect to initiate the operation.

Log files do not contain any confidential information on the operating system settings or

the user documents.

Troubleshooter

Here you can find answers to the most frequently asked questions that might arise while using the program.

1. I try to run an operation, but the program claims my partition is in use and suggests restarting the computer.

There are a number of operations that cannot be performed while your partition is in use (or locked in other

words). Please agree to reboot your machine to make the program accomplish the operation in a special boot-

up mode.