User manual

Partitioning Options

This section contains a set of options that will be taken into account during partitioning operations:

• Enable 64 KB cluster size for FAT16. Mark the checkbox to enable 64KB clusters for FAT16 partitions. Thus you

will be able to create FAT16 partitions up to 4GB in size

Due to the maximum cluster size of 32KB for Windows 95/98/ME or MS DOS, FAT16

partitions larger than 2GB are not reliably accessible under these operating systems.

• Request confirmation before partition deletion. Mark the checkbox to activate an additional security

mechanism. Thus when going to delete a partition you will be automatically requested to enter its label.

• Request confirmation when converting FAT16 to FAT32. Mark the checkbox to automatically request

confirmation before converting FAT16 to FAT32. There are a number of situations when this kind of conversion

is the only way out to accomplish the operation. For instance, you are going to migrate your system to a larger

hard disk with the proportional resize of existing partitions, what is very convenient. As a result you can get

original FAT16 partitions go beyond the 4GB limit. Thus without conversion to FAT32, this operation will in no

way be possible to accomplish. The same goes for any copy hard disk/partition or restore hard disk/partition

operation involving an extra upsizing.