PARAGON BATH SHOWER DOOR/ BATH TUB SCREEN INSTALLATION INSTRUCTIONS T2-2222 ………………………………………………………………………………………… Please read these instructions carefully before installing. If you have any questions regarding installation, please call our technical support specialists Monday through Friday 9:00 AM – 5:00 PM at Phone: (888) 895-1989, or e-mail our technical support group at Support@Paragonbath.com. For more information on Paragon Bath Shower Doors & Tub screens please visit www.ParagonBath.
Installing Preparations 1. After opening the carton, please read the instructions carefully, examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that Paragon Bath will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed.
Detailed Diagram of Shower/ Bath tub screen Components Component list No. Name Q’ty No.
10 Philip’s head countersunk self-tapping screw ST5*40 8pcs 27 Moving glass 1pc 11 Philip’s head screw ST4*30 4pcs 28 Stationary glass 1pc 12 Philip’s head screw ST4*8 4pcs 29 handle 1pc 13 Philip’s head screw ST4*16 2pcs 30 14 Φ 5/16” wall anchor 9pcs 31 Support bar Glass clamp pad 1pc 15 Φ 1/4” wall anchor 7pcs 32 Philip’s head screw ST4*25 1pc 16 Water leading block 1pc 33 Philip’s head screw ST5*35 1pc 17 Water leading groove 7pcs 34 WARM TIPS 01: Open the pac
Fig 1 Warm tips: In order to get convenient install, the waterproof strip may need to cut according to the distance of the hinge groove on glass. See Fig 1 1.2. Move the glass away from the wall and use 5/16" drill bit to drill holes then knock the 5/16" wall anchors (14) inside the holes. Later place the moving glass back to the wall, the hinge holes should point directly to the holes which have just been drilled.
2. Install stationary glass 2.1. Install wall profile Lay down the stationary glass to the ground (better to use some soft support beneath), push the wall profile (01) to the glass slowly from one side to another. Please see Fig 3 for details Warm tips: Please pay attention to the upper side and bottom side of the glass before install the wall profile on it. Not to upside down the glass. The side with shelf holes on it is upper side, yet the side without shelf holes is bottom side. Fig 3 2.2.
Warm tips: In order to leave space to install bottom fixed block, better to shorten 15mm of the sealing strip on the side which close to the moving glass. Fig 4 2.3. Install waterproof strip (04) and magnetic strip (03) Please see Fig 5 for details Fig 5 2.4.
Fig 6 3.
Fig 7
4. Install bottom fixed blocks 4.1 Place the threshold bar (07) to the base, put the bottom fixed block L (09) on the left side of the threshold and put bottom fixed block R (08) on the right side. 4.2 Draw holes on the base through the holes on bottom fixed blocks. 4.3 Use 1/4 inch drill bit to drill holes and knock in 1/4 inch anchors (15), then use Philip’s head self-tapping screws ST4*16 (13) to lock bottom fixed blocks and threshold to the base and cover the screw holes with screw covers (18).
05 Fig 8 5. install decorative profile Snap the top side of the decorative profile (02) to the bulge of the wall profile and insert the decorative profile bottom side to the wall profile bottom grove then knock the decorative profile gently to make it perfectly contact with the wall profile. Please see Fig 9 for details Fig 9 6. Install glass shelf 6.1 Fix the glass shelf clamp A (19) to the stationary glass 6.2 Fix the glass shelf clamp B (20) to the wall.
(15), use Philip’s head countersunk self-tapping screw ST4*25(32) to fix clamp B to the wall. 6.4. Push the glass shelf into the mounts of clamp A and clamp B and use Philip’s head screw driver to lock the bottom screws of the clamps.
06 07 Fig 10 08 7.Install support bar 7.1.
Fig 11 7.2. Snap one side of the support bar to the stationary glass, another side touch to the wall, adjust the proper position and then draw holes on the wall. 7.3. Use 5/16" inch drill bit to drill holes and knock in 5/16" anchors, then use Philip’s head screw ST5*35 (33) to fixed the head of the support bar to the wall. 7.4. Use Philip’s screw driver and hexagon spanner to fix the screws to lock the complete support bar.
Fig 12 8. Install handle(29) Please see Fig 13 for details Warm tips: handles have been assembled before shipment. You just need to disassemble and fix it during install. Fig 13 9.
decorative cover (25) to it and knock it tight to touch to the profile, a perfect sealing result will be done. Please see Fig 14 for details Fig 14 10.
Product Maintenance To ensure long lasting life for your shower door/bath tub screen, please clean the dust or stains use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. To ensure a long lasting hardware finish, wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid.
WARANTY INFORMATION This is Paragon Bath LLC exclusive written warranty effective August 8, 2014 This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only to Paragon Bath LLC products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be provided with all warranty claims.
will Paragon Bath LLC be liable for costs of repair or replacement of any installation material, including but not limited to tiles, marble, contract, negligence, strict liability in tort, or warranty of any kind) for any indirect, special, incidental, consequential, or exemplary damages (including but not limited to lost profits). Paragon Bath LLC is not responsible for installation, removal or reinstallation costs of any product requiring warranty services.
Paragon Bath LLC is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is excluded from this warranty. Paragon Bath LLC reserves the right to modify this warranty at any time - such warranty modification will not alter warranty applicable at the time of sale of the products in question. Product must be registered within 30 days from time of purchase at www.ParagonBath.com WARRANTY Paragon Bath LLC.