User Manual

37 38
16. PRECAUTIONS
To avoid malfunction, explosion, or fire:
Do not microwave, open, drop, puncture, take apart, bend,
crush, paint, or incinerate the camera.
Do not solder or glue parts onto the camera and do not insert
foreign objects into any openings, such as the Micro USB port.
Do not use the camera if it is damaged, this includes a punc-
ture, missing O-ring, or water inside and do not attempt to
remove or change the battery.
Do not dry the camera in an oven, with a hairdryer or any other
external heat source, especially open fire.
Do not use the Paralenz Dive Camera for dives deeper than
250M/820F/26 ATM.
When opening and charging the camera, make sure that your
hands are not wet, and that water from other sources cannot
enter the camera or charger. This may cause electrical shock.
The Paralenz Dive Camera should not in any way be used as a
dive computer, or as a supplement to a dive computer.
When charging, make sure the charger is a USB type charger,
of max 5V, or use a USB plug on a computer.
If the front lens on the Paralenz Dive Camera should break,
take care to avoid injury. Keep out of reach of children.
1 7. WARRANTY
The warranty covers all manufacturing defects and faults in
design. During the warranty period, Paralenz will replace any
defective units with a new or refurbished unit at our disgres-
sion
The warranty does not cover depletion of the battery or results
from normal wear and tear. It also does not cover unautho-
rized repairs, negligence, improper use or accidents.
The warranty period begins from the date of purchase.
The warranty does not cover commercial or rental use.
In case you experience any fault with the Paralenz Dive Camera
in the warranty period, please go to www.paralenz.com/support
and fill in a warranty claim, to start the replacement process.
For further information on how the warranty applies to your
country please visit www.paralenz.com/support.