User Manual

13 14
5. CUSTOM MODE
5.1 MODE SCREEN APPEARANCE
The custom mode screen will appear when the mode is
selected.
Mode assigned
Battery level Resolution
Frames per second
If you use flashlights or floodlights when diving, turn off DCC™.
Click three times to turn off/on the DCC™. The screen will show
the DCC™ status. For more information see section 6.4.
The custom mode function can have 1 of 4 different modes
assigned to it: video, slow motion, time lapse or photo burst. Go
to settings to see how to assign custom modes (See chapter
6 – Camera settings).
Video Slow motion Time lapse Photo burst
5.2 RECORD VIDEO, SLOW MOTION
OR TIME-LAPSE
To record a video, slow motion or time-lapse 1) the custom
mode icon on the selector ring should be selected (make sure
that you have the wished mode assigned to it. 2) Hold the
activation switch for 1 second to start the recording. 3) To stop
a recording, hold the activation button for 1 second.
1 sec. 1 sec.
Start Stop
2
3
1
5.3 TAKE PHOTO BURSTS
To take a photo burst 1) the custom mode icon on the selector
ring should be selected (make sure that you have the photo
burst mode assigned to it. 2) click the activation switch. 3) A
screen will appear indicating that the camera is taking a photo
burst. The camera is ready to use again when that screen
disappears.
Click