Quick Start Guide

5
SD-Card
Remove the end cap and insert a
micro SD-card. It must be a
Sandisk card with class U3 or V30.
Select the power icon on the selector ring and hold the activation
switch for 4 sec. To turn off again hold for 4 sec. while on Power mode.
Turn on camera
A capacity of 32 GB or more is recommended. A full memory card is as
useful as no memory card! Make sure to empty the SD-card after each
export.
Hold 4 sec.
or
The same mechanism is used when you put the end-cap back on. Pull
back the “collar”, push it back on.