Full Product Manual

Page 16
The glass front must be removed and the appliance must be secured in its location before the crystal
embers are installed.
1. Carefully place crystal embers into the bottom media tray on the front of the appliance as illustrated.
Apply an even layer from side to side.
LED Back Light Removal
The glass front must be removed and the appliance must be secured in its location before the crystal
embers are installed.
1. Unscrew the two screws in Figure A.
2. Lift off the LED cover and remove.
3. Disconnect the wires where connected to the circuit board. The disassembly is complete.
your unit the most exquisite and stylish look. To order our Diamond Embers, contact our toll-free customer
service at 1-866-592-6667.
Crystal Embers Installation
11.24.17