Installation Guide

Page 17
Multi-functional Operating with Remote Control
Turning ON/OFF the appliance:
1. Ensuresteps1-3inthe“MainPowerSwitch”procedurearerstfollowed.
2. Pressthe“”remotebuttontoturnonbothameandemberbedLEDs.
3. Pressthe“”buttonagaintoturnoffbothameandemberbedLEDS.
4. Verify the lights are shut off.
5. Turn off the main power swtich.
6. Unplug the power cord.
Note: The LEDs are at the brightest when the heating element is shut off. The
power swtich on the appliance must be turned on for the remote control to operate.
Changing the temperature:
1. Ensure steps 1-2 in “Turning ON/OFF the appliance” are previously followed.
2. Press the “ ” button to turn on the heat element to HIGH temperature at
1500W.
3. Press the “ ” button again to decrease the temperature to LOW temperature
at 750W.
4.
Note: Pressing the “ ”or “ ”
a second time turns off the heating element.
Changing LED options:
1. Ensure steps 1-2 or 1-3 in “Turning ON/OFF the appliance” are previously
followed.
2. Pressthe“”buttontoturnonorofftheameandemberbedLEDs.
3. Press the “ ” button multiple times to cycle through 3 different brightness levels and OFF for the yellow
ameLEDs.
4. Press the “ ” button multiple times to cycle through 3 different brightness levels and OFF for the blue
ameLEDs.
5. Press the “ ” button multiple times to cycle through 3 different brightness levels and OFF for the pink
ameLEDs.
6. Press the “ ” button multiple times to set operating duration to 30min, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h, or off.
7. Press the “ ” button multiple times to cycle the back LED lights through red, yellow, blue, red/blue, red/
yellow, yellow/blue, red/yellow/blue, fade, or OFF.
Note: Steps 2-7 can be done independently.
11.24.17
07.17.18
Press the “ ” button multiple times to set ambient temperature to 18°C,
19°C, 20°C, 21°C, 22°C, 23°C, 24°C, 25°C, 26°C, 27°C, 28°C, ON or OFF. The
number will appear on touch panel display.