User Guide

10
Figure 4-9 Area Settings
2.1 Display Settings
Users can select the control area of the graphics tablet as the whole or single display;
2.2 Whole Display
The working area of the graphics tablet can map the whole are of the display;
2.3 System Display Settings
Users can set the computer’s screen resolution and multi-screen working mode;
2.4 Rotation Settings
User can set the angle of
Ninos M
graphics tablet, and 0° is the default (it means that it can be used
on the left). In case of other angles, please rotate the
Ninos M graphics tablet
through the relevant
angles clockwise;
2.5 Whole Area
The graphics tablet’s whole working area maps the display;
2.6 Display Scale
Users can adjust the scale of the working are according to the display scale;
2.7 Working Area Settings
Users can set the effective working area of the graphics tablet. In terms of detailed information,
please refer to dynamic graphs.
3, Key Settings