Warranty

—4—
—5—
Package Contents
This box contains a night vision optics with,
Installation
1.Battery installation
—6—
1*NV008P/NV008P-LRF; 1* Micro USB cable;
2*Hex-nut wrenches
; 1* Mount
Storage card is not included. Please prepare a TF card (128g maximum)
for data storage.
Please use lithium chargeable 3.7V flat battery 18650. Remove battery
compartment cap and make sure setting the positive polar towards to the
direction inward. Put the cap back and screw it until tight. ( Fail to do so
may result in restarting!).
3. Mount Installation
2.Adjustments
—7—
A simple test can be taken to check the functions of the device after
the installation of battery. First, rotate and adjust the eyepiece dioptre
adjustment ring(6) until you see the four-character icon on the screen (
there's no need to see a clear image ), then rotate the Objective lens
adjustment ring(7) until you can see your target clearly. Second, switch to
different modes, test IR, Red dot or Rangefinder.
There's three mounting holes in the base of the device. Attach the
mount to the base of the device by using a hex-nut wrench and screws.
The mount can be installed in multiple rails.
Specifications
Model
Magnifying
power
IR power
IR wave
length
IR illuminate
distance
Video
resolution
Eyepiece
resolution
Ballistic
Ranging
range
Protection
Dimension
NV008S
6.5x-13x
5w
850nm
Ip67
1920*1080
＞8h
Battery life
Diopter
±5
Focusing
1024*768
350m
137*51*65.5
Color mode
Color/
Mono
Transmission
method
WiFi
30mm
Yes
3cm-∞
NV008S-LRF
Eye Relief
1200m
/
Instructions
1.Turn On/Off：
2.Sleep Mode：
3 The Eyepiece Dioptre Adjustment.
Turn on the device with a short press of Power button(12).Turn off the
device with a long press of Power button(12). Power indicator(3) will keep
light when the device is turned on.
Enter sleep mode with a short press of Power/Sleep button(12) when
the device is turned on.
Power indicator(3) will keep light when the device entering sleep
mode.
The purpose of dioptre adjustment is to get a clear image for users with
different vision. Rotate and adjust the dioptre adjustment ring (6) unti
(mm)
Calculator
Transmission
port
Type C
Adjustment