User's Manual

Sistema FIREMASTER III "Millennium" Manuale di istruzioni
34
3.2 THE "FIRE"MASK
At any moment and from inside any mask of the "SAFE-TEST" function, it is
possible to switch to the "FIRE" mode simply placing the rotary keyswitch on
this position.
The following mask will be immediately displayed:
By default the following operating modes will be selected:
- SHOW TIME: set to ZERO, waiting for the first fire command.
- TIME TO NEXT: not active in MANUAL MODE.
- SEQUENCE 1: all lines with sequence 1 will be set off
- NEXT SHOT 1: in manual mode it does always have the same value as
SEQUENCE.
- MANUAL MODE (also selectable with F3 key)
- COMMUNICATION: RADIO. This icon shows the setting made in the
"TOOLS" mask relative to the communication mode (RADIO or CABLE)
If it should be necessary to fire a sequence other than the displayed one, it will be
sufficient to type the sequence number on the numeric keypad and confirm with
"ENTER". To move 1 digit more or less with respect the displayed value, the two
"arrow" Ï Ð keys can be used instead.
To send the FIRE command, it will be necessary to press in rapid succession the
pushbuttons "ARM" and "FIRE" .