User's Manual
Table Of Contents
- SYSTEM FIREMASTER IV
- "Millennium Three"
- CONTENTS
- 1. Base Station - Control Unit TX5000 3
- 3.3.5 " AUTOMATIC SHOW ” Mode 55
- 3.3.6 Options in “SHOW” mode 58
- 3.3.7 Operation Notes when in "FIRE MODE" 59
- 4.8.2 Coaxial cable connection 74
- 4.8.3 RS-485 77
- 4.8.4 RS-232 79
- 5. BPK48-A Battery Pack 81
- _
- _
- 1. COMMAND UNIT MODEL TX 5000
- BASE STATION MODEL TX5000
- 1.1 FRONT-PANEL DIAGRAM
- _
- _
- 1.1.1 Front-panel commands description
- 1.2.1 Instrument case and connector description
- 1.3 Operation
- 1.5. "SHOW MANAGEMENT" Mask description
- 1.6. "TOOLS" Mask
- 1.7. "SYSTEM SETUP" Icon
- 1.8. "OLD UNITS SETUP" Icon
- 1.9. "TONE GENERATOR" Icon
- 1.10. TONE GENERATOR TESTING
- _
- 1.11. "SMPTE TEST" Icon
- 1.12. "MIDI TEST" Icon
FIREMASTER IV "
MillenniumThree
" radio shooting system User’s manual
1.12. "MIDI TEST" Icon
The MIDI test window is exactly similar to the previous one for all
concerning the data displaying and general operation.
The MIDI TIMECODE signal must be connected to the MIDI IN connector
on the front-panel.
Note as the time information IS THE SAME for SMPTE and MIDI: only
the transmission protocol and the input/output circuitry changes between the
two methods.
The SYSTEM FIREMASTER TX5000 does implement MIDI /
TIMECODE decoding function only and doesn’t manage any other standard
MIDI commands.
20