User's Manual

FIREMASTER IV " MillenniumThree " radio shooting system User’s manual
NOTE the display back lighting is timed and automatically turns off
after 30 seconds. Pressing any key it will turn on again immediately
The MAIN MENU mask SHOW MANAGEMENT contains 6 icons
for every operation mode:
The selection of the proper icon is made with F1 and F2 keys: the six
icons will be evidenced in sequence. The F6 "SEL" key "opens" the
highlighted icon. Inside this mask, all other keys are INACTIVE.
1.5. "SHOW MANAGEMENT" Mask description
"SHOW VERIFY" Icon. It can be used only if one is operating
using a show created externally on a PC and already loaded on the
TX5000 Base Unit memory. It allows carrying out in a completely
automatic mode the query of all remote units active on the field and
to perform a complete verify of the data inside each Unit with the
data of the whole show stored inside the TX5000 Base Unit. All data
discrepancies will be reported in order to allow a fast and effective
correcting action.
 "SHOW EDITING" Icon. It can be used only if one is
operating using a show created externally on a PC and already
loaded on the TX5000 Base Unit memory. It allows to manually
modify the parameters of the internally-stored show.
 "UNITS PROGRAM" Icon. It can be used only if one is
operating using a show created externally on a PC and already
loaded on the TX5000 Base Unit memory. It allows to transfer a
program (a show) from the Base Unit memory to the remote
units on field. The remote units will be automatically "called" in
sequence and the base Unit will provide to download for each
unit the needed programming parameters. Should any unit fail to
reply, the "download" process will be halted and an error
message will be displayed.
8