User's Manual

FIREMASTER IV " MillenniumThree " radio shooting system User’s manual
25
When a Remote Unit transmits back data and the situation is similar to the one
depicted at point (2) or (3), the operator can simply read the data values (if the
query was made just to make a CONTROL), or he can take the suitable actions if
some parameter should fall outside the acceptable limits, such as: recharge or
replace the Battery Pack if the read voltages are too low, replace the antenna or vary
the position of the Remote Unit attempting to increase a weak radio signal, or
verify the firing line if the resistance value is too far from the expected value with
reference to the number of connected squibs and the cable length.
If otherwise THE PARAMETERS OF THAT LINE MUST BE
MODIFIED (new programming), then the operation will be as described in
the next chapter.