User's Manual

FIREMASTER IV " MillenniumThree " radio shooting system User’s manual
#24. All other parameters (Cue, Seq, Start, Delay, Group) will remain
UNCHANGED
This process can be repeated for as many Units as it may be necessary.
2.5 THE “UNITS PROGRAM” MENU
Once the show data have been revised, edited and permanently stored in the
memory of the TX5000 Base Unit as previously described, it will be
necessary to send these data to each Remote Unit RX48.
First of all, switch ON all the RX48 Units (and eventually RX24 and RX24-
B is a “mixed” system is used) and wait for the auto-test procedure. After all
field Units executed and passed the auto-test, select the “UNITS
PROGRAM” icon from the MAIN MENU and get this mask:
Type “0” to program ALL the RX48 Remote Units, otherwise type-in the
number of the Unit you want to program and then confirm with ENTER.
If you are using a “mixed” system comprising FIREMASTER II,
FIREMASTER III and FIREMASTER IV Remote Units, remember to
select the “OLD UNITS” function in the “TOOLS” mask and to type here
the number of all FIREMASTER II Units eventually used: the System will
recognize automatically these Units and will change the programming
procedure accordingly, thus making fully “transparent” to the operator the
programming task.
The programming will start immediately with F1 “EXEC” key: the Unit(s)
will be addressed in sequence and the data will be automatically sent to each
44