Manualshelf

User's Guide

ManualsBrandsPark Air Systems ManualsElectronicsDefence Radio for Civil and Military applications
51525354555657585960
FREQUENCY SELECTION
64 The radio can be set to any operational frequency without allocating the frequency to a channel. To
set the frequency, proceed as follows:
(a) Using the numerical data keys, enter the required frequency, then press the FREQ key. The
equipment is now set to operate on the selected frequency. For example, to set 269.5 MHz:
(b) Using the numerical data keys,
enter the frequency 269.5 MHz.
The displays (in edit mode) show:
(c) Press the FREQ key. The displays
(in monitor mode) show:
(d) Select the required operational mode, for example, AM, NB. The radio is now set to operate
on 269.5 MHz, AM, narrow-band mode.
Section 4 3000DV2 Radios
Page 14
This procedure should be used when 25 kHz channel
spacing is required. If 8.33 kHz channel spacing is
being used, refer to paragraph 71 on page 17.
269.500.
FREQUENCY CHANNEL MONITOR
269.500
FREQUENCY CHANNEL MONITOR
See FCC Warning page iv