User's Guide

CHANNEL FREQUENCY SETTING
65 Up to 99 channels can be stored in the equipment’s memory. Each stored channel comprises an
associated frequency, and operational mode information. The following example details how to pre-set
channel 16 with a frequency of 251.025 MHz:
(a) At the radio’s front panel use the
numeric keys to enter the required
frequency: 251.025 MHz. The
displays show:
(b) Press the FREQ key. Displays (in
monitor mode) show:
(c) Set the AM/FM, narrow-band/wideband (NB/WB) and Link 11 mode select switches as
required for the frequency channel (for example, AM, NB, LINK 11 off).
(d) Using the numerical data keys,
enter the channel number
required, for example, 16.
Displays (in edit mode) show:
(e) Press the STORE key. Displays
(in monitor mode) show:
66 Channel 16 is now set to a frequency of 251.025 MHz operating in AM narrow-band mode. Other
channels up to a maximum of 99 can be set up as detailed in steps (a) to (e).
3000DV2 Radios Section 4
Page 15
This procedure should be used when 25 kHz channel
spacing is required. If 8.33 kHz channel spacing is
being used, refer to paragraph 71 on page 17.
251.025.
FREQUENCY CHANNEL MONITOR
251.025
FREQUENCY CHANNEL MONITOR
16 .
FREQUENCY CHANNEL MONITOR
251.025
16
FREQUENCY CHANNEL MONITOR
See FCC Warning page iv