User's Guide

OPTIONS
16 In addition to the standard operational functions the following options are available (see Table 1-1
for applicability to your model). Some of the options require additional hardware; others are built-in the
radio and are available when the option is selected from the front panel. Table 1-1 details which options
can be fitted to which radio.
VHF/UHF Guard Receiver (Option 01)
17 Guard receiver module operating on 121.5 or 243.00 MHz AM. Can be configured for independent
or combined (with main receiver) antenna operation. This option requires an additional module to be
fitted in the radio.
Configurable Antenna Port (Option 04)
18 Configurable antenna switching. This includes single and multi-antenna options configured to a
customer’s requirements.
Fill Gun Port (Option 05)
19 Provides a front panel fill gun port (for use with Have Quick radios).
External Power Amplifier/Filter Drive (Option 06)
20 A multi-purpose interface for use with an external power amplifier, or an auto-tune filter. This option
is built-in and becomes operational when selected from the radio’s front panel.
Internal Have Quick (Option 07)
21 Option 07 provides a Have Quick II ECCM capability. This option requires an additional module to
be fitted in the radio.
VHF Frequency Extension (Option 08)
22 Provides for extension of the VHF frequency range to cover 100 to 163 MHz. This option is built-in
and becomes operational when selected from the radio’s front panel.
Maritime Band (Option 10)
23 Provides pre-programmed international maritime channels within the frequency range of 156 MHz
to 163 MHz. Information regarding maritime frequency channels is given in section 4 of this handbook.
This option is built-in and becomes operational when selected from the radio’s front panel.
Section 1 3000DV2 Radios
Page 4