User's Manual

T6T VHF 100 W Transmitter Page 25 Maintenance

Back to Transmitter

Main Page

Fig 3 Blank VFP Screen

(3) At the Menu Bar, click on Serial Port and select either Com 1 or Com 2. The selection must

correspond to the port used to connect to the radio.

(4) Load the required information from the radio, or from a stored file. The required information can

be radio settings, frequency channels, BIT information, or all of these.

To load a previously stored file, select File > Open > All

or, File > Open >Settings

or, File > Open > Channel

or, File > Open > BIT

To load information from the radio, select Radio > Retrieve > All

or, Radio > Retrieve > Settings

or, Radio > Retrieve > Channel

or, Radio > Retrieve > BIT

(5) If required, amend any radio Settings or Channel information.

(6) Download the radio’s profile as shown on the VFP screen to either the radio, or to a file.

To download into the radio, select Radio > Send > All

or, Radio > Send > Settings

or, Radio > Send > Channel

To download to a file, select File > Send > All

or, File > Send > Settings

or, File > Send > Channel

or, File > Send > BIT