User's Manual

T6T VHF 100 W Transmitter Page 11 Operation
Back to Transmitter
Main Page
Changing the Transmitter Operating Frequency
The transmitter frequency can be changed in two ways: either from the frequency screen, or by recalling
a preset channel. This procedure details the use of the Frequency screen.
F r e q 1 1 8 . 0 0 0 M H z
C a n c e l O K
(1) From the Control screen, select
frequency to display the Frequency
screen.
(2) Turn the switch to highlight the digit to
be changed, then press the switch.
(3) Turn the switch until the required digit
is shown, then press the switch.
(4) Repeat until the required frequency is
shown, then highlight OK and press the
switch.
(5) Only frequencies that fall between the
band edge settings can be selected.