User's Manual

T6T VHF 100 W Transmitter Page 30 Operation
Back to Transmitter
Main Page
Band Edges
The frequency range of the T6 100 W transmitter is 118 to 136.975 MHz. If required, transmission can
be limited to either one or two smaller parts of the frequency band by setting the band edges, BE1 to
BE4. Transmission is possible between BE1 and BE2 frequencies, and between BE3 and BE4
frequencies.
Table 8 Band Edge Settings
BE1 BE2 BE3 BE4
B63100HS/NB set so that the full frequency range can be
transmitted.
118.000 136.975 118.000 136.975
Example: Transmitter set to transmit only those frequencies
in the range 120 to 130 MHz.
120.000 130.000 120.000 130.000
Example: Transmitter set to transmit only those frequencies
in the ranges 120 to 125 MHz and 130 to 135 MHz.
120.000 125.000 130.000 135.000
B E 1 1 1 8 . 0 0 0 M H z
B E 2 1 3 6 . 9 7 5 M H z
B E 3 1 1 8 . 0 0 0 M H z
E x i t > >
B E 4 1 3 6 . 9 7 5 M H z
E x i t < <
The Band Edge screen is accessed from the
Control screen.
Band edge frequencies can be set only in
increments of 25 kHz.
If the transmitter is required to operate over the
full range, the band edge parameters must be set
to the lowest and highest values in the range (see
Table 8).