User's Manual Part 2

T6T 300 Watt VHF Transmitter Page 87 Installation
Rear Panel Connectors
Fig 25 Drive Assembly External Signal Connectors
Table 17 Rear Panel Connector Usage
Connector Type Usage
External speaker 3.5 mm stereo jack Connects an external loudspeaker for monitoring sidetone.
MARC 9-way D-type Used to connect to a MARC remote site equipment RSE2
Used to connect a T6 controller or hub
Used to terminate external audio and PTT signals when a
remote site equipment or T6 controller is not used.
MARC audio RJ48 Used as an alternative to the MARC connector for terminating
external audio and PTT signals.
MARC data RJ48 Used as an alternative to the MARC connector for terminating
data signals to and from a compatible data system.
Facilities 15-way D-type Provides a number of optional facilities that can be used as
required. Table 24 on page 95 lists the facilities.
T1/E1 RJ48 Used for connecting the radio to a Mode 3 network computer,
connecting a transmitter and receiver together as a Mode 2
base station, or for connecting to a digital voice and data
network.
HDLC RJ48 Used to connect to a Mode 2 network computer.