User's Manual

M7X and M7R Page 5-28 Maintenance
Back to Menu
Removing the RF PA
To remove the RF PA:
(1) Remove the radio’s top cover as detailed on page 5-12.
(2) Remove the Interface module as detailed on page 5-26.
(3) Identify the RF PA cover, shown in Fig 5-18, and using a Torx T10 screwdriver, remove and
retain the 26 securing screws (part number 36T46330060). Remove and retain the RF PA cover.
Fig 5-18 RF PA Cover Securing Screws
(4) Identify the seven M4 x 8mm pan head screws (Fig 5-19) that secure the module to the radio’s
chassis. Using a Torx T15 screwdriver, remove and retain the seven screws (part number
36T63340080) and associated wavy washers.
RC INTERFACE
CUSTOM INTERFACE
GUARD RECEIVER
RF CONTROL
PROCESSOR
STANDARD INTERFACE
RF PA Cover
M3 x 6 mm countersunk
(26 off)
securing screws
ABCDEF