User's Manual

M7X and M7R Page 5-11 Maintenance
Back to Menu
Linearisation feedback cable OK or Fault See Replacing Faulty Cables on page 38.
Rx 90 MHz IF cable OK or Fault See Replacing Faulty Cables on page 38.
Tx 90 MHz IF cable OK or Fault See Replacing Faulty Cables on page 38.
Transmit drive cable OK or Fault See Replacing Faulty Cables on page 38.
10 MHz reference input OK, Fault or N/A See Replacing Faulty Cables on page 38.
Guard receiver RF cable OK, Fault or N/A See Replacing Faulty Cables on page 38.
DC supply
OK, or Warning when
operating from a dc supply
that falls below 23 V
AC supply
OK, or Warning when the
ac supply fails and
operation switches to dc
VSWR OK or Warning (>3:1)
Ambient temperature OK or Warning (>55ºC)
E-BIT(A) OK or Warning
E-BIT(B) OK or Warning
Table 5-2 BIT Parameters (Continued)
Parameter Monitoring Range Remedial Reference