Product Info

T6-D-USER-TRV-EN Page 4-3 Operation
© Park Air Systems Ltd 2016
Settings are changed to suit system engineering and/or user requirements.
Note:
A website is hosted in the radio. To set a radio configuration, see 4.3.2 How to set a radio configuration.
Settings Description Notes Default
Loudspeaker Volume Loudspeaker/Headset volume
Selection of loudspeaker (shown) or headset volume.
Adjust the volume setting with the rotary/push switch
Loudspeaker
Freq 118.000 MHz Carrier frequency Example of carrier frequency
Option
minimum
Freq Preset 1 Frequency Preset 1 to 100
Step 25 kHz Front panel frequency step size Selection of 8.3 kHz or 25 kHz steps. 25 kHz
Reference 50.0 % Reference frequency 0 to 100% 50%
Offset 0 kHz Carrier offset
0 kHz, ±2.5 kHz, ±4 kHz, ±5 kHz, ±7.3 kHz, ±7.5 kHz
and ±8 kHz
0 kHz
RF Power 50 W Transmit output power AM Voice: 5 to 50 W in 1 W steps
Option
maximum
Mod Depth 95 % Modulation depth 5 to 95% 85%
ALC ON Transmit automatic level control On/off. Line only On
Mute ON Transmit mute On/off. Line only On
Mic PASSIVE Microphone type Passive or Active Passive
Sidetone LOW Transmit sidetone Low or high Low
Inhibit OFF Radio inhibit On/off Off
Audio AGC ON Receive audio AGC On/off On
Squelch -102 dBm Receive squelch level -114 to -60 dBm -107 dBm
Squelch Carrier Squelch option CARRIER / S/N / OVERRIDE S/N
IP1
192.168.1.100
IP address (LAN 1) Example of IP address (LAN 1)
NM1
255.255.255.0
Subnet mask (LAN 1) Example of subnet mask (LAN 1)
IP2
192.168.1.100
IP address (LAN 2) Example of IP address LAN 2 (standby port)
NM2
255.255.0.0
Subnet mask (LAN 2) Example of subnet mask (LAN 2)
IP3
192.168.1.100
IP address (LAN 3) Example of IP address LAN 3 (front panel port)
NM3
255.255.0.0
Subnet mask (LAN 3) Example of subnet mask (LAN 3)