Product Info
Table Of Contents
- Foreword
- 1 Overview
- 2 Description
- 3 Installation
- 4 Operation
- 5 Maintenance
- 6 Connector information
- 7 Specification
- 8 Associated equipment
- Index
- Annex
T6-D-USER-TRV-EN Page 5-4 Maintenance
© Park Air Systems Ltd 2016
(5) Move the fan away from the rear panel.
(6) Disconnect the fan connector.
(7) Check the heatsink cooling fins for blockages.
(8) Connect the new fan.
Note the cable and fan position:
(9) Place the fan in position on the rear panel.
(10) Attach the fan with the four (4) fixing screws.
(11) Install the radio to the cabinet (if applicable).
(12) Connect all the cables.
(13) Switch on the radio.
(14) The radio continually checks the correct function of the fan.
Cable position
Fan markings
Note:
The radio is shown on
its left-hand side
Note:
The radio is shown on
its left-hand side
Clip-on connector