User's Manual
Table Of Contents
7.2 Opening / closing with an electronic lock
The housing is protected by a lock guard cover in order to reduce the risk of
vandalism.
• Insert the door opening tool (1).
• Use the tool (2) as a lever to lift up the guard cover tab.
• Once the hole locks are cleared (3), insert the square key (4).
• Insert the maintenance board in the card inlet (5).
• Enter the identification number and validate (6) (refer to section 9.2 "Use of
the maintenance menu with the door closed").
• Once the code has been recognised, the maintenance menu is displayed. To
release the electronic lock bolt, validate "LOCK & UNLOCK" in the
maintenance menu.
• Remove the maintenance card from the reader.
Guard flap
D5158
6
4
3
5
2
1
Square key
Tab
• Unlock the door with the square key and open the door.
• Complete the operation.
Strada Rapide - Operation manual
21