User's Manual

8. Replenishing supplies
IMPORTANT:
For complete reliability, use the parts and supplies recommended by Parkeon
only.
8.1 Ticket roll
To change the ticket roll, the terminal must be in service.
Open the housing door.
Remove any paper remaining in the printer.
Lift the paper guard and take the paper roll and reel core out of the terminal.
Check if the new roll is flat and position the paper reel core.
Place the new roll and paper reel core in the terminal.
Check if the roll is turning freely in the rack support and close the paper
guard.
Insert the paper in the printer guide.
Carefully feed the paper home into the printer.
Press T on the keypad (refer to "Programming interface" for the use of the
keypad).
TICKET CHANGED?
YES: TICK NO: RETURN
If the new ticket roll is full, press V or the green Validate button (the ticket
counter will be reset).
If the new ticket roll is not full, press C or the red Cancel button.
The printer will issue a test ticket.
Close the housing door and lock it.
With a test token, check that the terminal is operating correctly.
Strada Rapide - Operation manual
23